Gunworks

Suppressor Range

1/7/2020 - Suppressors by mail order now require a police mail order form required to purchase refer to Arms Act Changes - Purchasing Parts and Suppressors 

Gunworks Canterbury currently leads the centrefire rifle sound suppressor market, introducing the overbarrel suppressor concept in the early 1990’s.

Suppressors are made from a combination of stainless steel internals and aluminium body to reduce weight.  Life expectancy of the unit is in excess of 16000 rounds from the ones we have checked when changing barrels.

Fitting time is 3-7 working days.  We recommend that users consider shortening their barrels slightly when the suppressor is fitted to reduce the overall length of the equipment, for example, a .223 with a factory standard 23 inch barrel would probably be bought back to 20 inches without any noticeable decrease in performance.

These suppressors are a 2 point mount and are impossible to knock out of alignment (as may happen with muzzle forward cans).  All suppressors incorporate a barrel isolator tube which prevents carbon and gas sticking to the outside of the barrel under the suppressor.

Sound signature of a high velocity round for any caliber, ie .222 Rem to 7mm mag, is similar to a stock whip cracking (or a 22 magnum thereabouts), that is the noise of the projectile breaking the speed of sound.  When used on game, the animal only notices the “stock whip” like crack originating above them.  The position of the firer is undeterminable.  This often leaves the animals milling and unsure of where to run, particularly at night under a spotlight.

Reasons for suppressor ownership: 

-     Reduces hearing damage

-     Reduces fright to other game animals

-     Reduces damage to the hearing of hunting dogs

-     Reduces concern among other outdoor users

-     No reduction in accuracy or hitting power.

The main difference between the 35mm and the 41mm suppressor (other than diameter) is the length forward of the muzzle.  The 35mm is 5" foward and the 41mm can be 4" forward.

gunworks_suppressor_work_required_form.pdfGunworks_Suppressor_Work_Request_Form_2022.pdf (SUPPRESSOR WORK REQUEST FORM)  

suppressors_and_length.pdf recommended_barrel_lengths.pdf (RECOMMENDED BARREL CHART)

35mm DIA DURALIUM SUPPRESSOR  - Reduces recoil by half and removes 2/3rds noise

SUPPRESSOR ONLY $360    FITTED $445

Suitable for 22 Hornet, 204, 222, 223, 22-250, 243, 260, 270, 280, 308, 7.62x39, 30-06  etc (not magnums)

13.5” in length (340mm), 5” forward of muzzle & 8.5” back

Weight — 350grams  (alu internal muzzlebrake 5-6,000 rnds)

Colours—Black

Suppressor suitable for barrels up to 19mm dia

 

EXTRA’S

Blue Suppressor Bag additional                                         $10.00

Barrel threading additional                                                $85.00

(custom made thread protector cap incl. in threading  price)

Neoprene Suppressor Cover                                               $22.50

 

41mm DIA DURALIUM SUPPRESSOR - Reduces recoil by half and removes 2/3rds noise

SUPPRESSOR ONLY $400                  FITTED $485

9” 41mm

Suitable for 22 Hornet, 222, 223, 22-250, 243, 260, 270, 280, 308, 7.62x39, 30-06  etc (not magnums)

9” in length (230mm), sits 4” forward & 5” back over the barrel

Weight 320 – 330grams  (alu internal muzzlebrake 5-6,000 rnds)

Colour - Black

13.5” 41mm Magnum

Suitable for 270wsm, 7mm saum, 7mm rem mag, 300wsm etc (not suitable for ultra mags)

13.5” in length (340mm), sits 5” forward & 8.5” back

Weight 460–470grams  (s/s internal muzzlebrake 20,000 rnds)

Colour—Black

EXTRA’S

Blue Suppressor Bag additional                                       $10.00

Barrel threading additional                                               $85.00

(custom made thread protector cap incl. in threading  price)

Neoprene Suppressor Cover 9"                                             $24.00

Neoprene Suppressor Cover 13.5”                                            $26.00

41mm Dia 9" Hybrid "Cleanable" Spartan Duralium Suppressor

SUPPRESSOR ONLY $500                 FITTED $585

Introductory offer $500, normally $550

We have two multi calibre suppressors available in the hybrid model and this is possible because the hybrid baffle system has tight tolerances allowing the small ranges of calibre. The hybrid baffle system also lowers the risk of stray bullets and bullet strike.

The first is suitable for 22 Hornet through to 243 including, 222, 223, 22-250, 243.

The second suppressor is suitable for 6.5 through to 30-06 including 6.5 prc 270, 7mm-08, 284, 280, 308, 7.62x39  etc (not including 300 PRC or belted magnums).  

9” in overall length (230mm), sits 4” forward & 5” back over the barrel (this is a "fixed" length and cannot be changed or added to)

Weight 360 – 370grams  (alu internal muzzlebrake 5-6,000 rnds)

Colour - Black

These are our first "cleanable" suppressors  – the “Hybrid” design was a pull apart suppressor that Robbie had begun creating prior to his death in 2018.  In 2022, our gunsmiths took Robbie’s vision and made it a reality.

The 41mm 9" suppressor is most suited for those who like to clean their suppressor.  Its great for those who need a light suppressor and prefer to be 4" forward of the muzzle rather than 5" forward of the muzzle.

These two videos show the suppressor in action on a 223

https://youtu.be/bhL3u-AeWnk

https://youtu.be/-uinQaYdlFw

This next video is of Sean cleaning Gunworks new Hybrid "cleanable" suppressor after 500 rounds (don't use brake clean like Sean though!!)

https://youtu.be/0rOslWYiJuk

    

BUSHMASTER 223 M4  41mm dia

9” in length (230mm), 4” forward, 5” back Weight — 365grams approx s/s internal muzzlebrake—Black

50mm DIA MAXIMUS SUPPRESSOR - Reduces recoil by half and removes 2/3rds noise

SUPPRESSOR ONLY $440 up to 12" or $500 for over 12"         FITTED $525 up to 12" or $585  for over 12"

Dimensions: 50mm outside dia.  The muzzle forward portion of the suppressor can be anywhere from 75mm to 125mm. The longer it is the better the suppression but some users want to keep the length down.

All applications when a big suppressor is desired, ideal for bull barrel rifles, heavys, subsonic, wildcats. 

5.75” (145mm) Suppressor Maximus Weasel – 223 only

4.25” Forward of muzzle & 1.5” back, weight 355grams approx

10” (254mm) Suppressor Maximus Standard – most calibers

4” Forward of muzzle & 6” back, weight 500 grams approx

12” (305mm) Suppressor Maximus Standard – most calibers

6” Forward of muzzle & 6” back, weight 700 grams approx


EXTRA’S

Blue Suppressor Bag additional                      $10.00

Barrel threading additional                               $85.00

(custom made thread protector cap incl. in threading  price)

Neoprene Suppressor Cover 10”                            $26.00

Neoprene Suppressor Cover 15”                            $30.00

   

50mm Maximus Pictures

 

Remington 788 .45 ACP is fitted with a Maximus suppressor 10″ forward which covers the whole barrel. The weight of the suppressor is 1197 grams.

 

North eastern arms AR15 .223 is fitted with a 6.5″ Maximus suppressor which sits 4″ forward and 2.5″ back which makes it 1mm off the hand guard. The weight of the suppressor is 433 grams.

 

AR15 .223 is fitted with a 10″ Maximus suppressor and sits 4″ forward and 6″ back.

 

 

Tikka T3 303win is fitted with a Maximus suppressor which sits 5” forward and 5” back. The barrel length was shortened 14”.

   

Remington 700 .223 has been fitted with a 18” Maximus suppressor body which sits 4” forward and 14” back to the stock. The barrel is not shortened.

Rock River Arms Lar-9, 9mm is fitted with a 10” Maximus suppressor, sits 1mm of hand guard.

Howa .308 is fitted with a 10″ Maximus suppressor the barrel is heavy fluted with square flutes & the length of the barrel is 22”.

Rossi Wizard .223 fitted with a 10” Maximus suppressor, 4” forward & 6” back.

Rock River Arms .308 fitted with a Maximus Suppressor which sits 3″ forward and 4″ back from the front sight.

35mm Spartan photos 


TOP